Mechanical testing · Instrumented scratch

Scratch Hardness Testing

Scratch hardness measures a material's resistance to being permanently grooved by a sharp stylus. A diamond stylus of defined geometry is drawn across the surface at constant load, and scratch hardness is calculated from the load and the width of the residual scratch, as defined in ASTM G171. It ranks how surfaces resist scratching in use, from metals to polymers, lenses and composites.

Scratch tracks on metal samples for scratch hardness

At a glance

Result
Scratch hardness number (HSp), calculated from normal load and residual scratch width.
Stylus
Conical diamond, e.g. 120° apex with 200 µm tip radius, as in the published metal study.
Width measurement
Scratch width by optical microscope, by low-load profile scans before and after the scratch, or by 3D profilometry.
Load
Constant normal load, with nano and micro modules covering soft polymers to hard metals.
Signals
Penetration depth, residual depth and friction recorded along the scratch.
Repeatability
Multiple scratches per sample under identical conditions.

What scratch hardness tells you

Lenses, screens, coatings, polished metals and plastic housings are judged by how well they resist scratching. Indentation hardness measures resistance to a static load, but scratching adds sliding, and with it ploughing, pile-up and fracture. Scratch hardness measures that combined resistance directly, giving a number that tracks real scratch damage. The scratch testing overview explains the test, the instrument and the other scratch methods.

How the test works

  1. A low-load profile scan records the original surface along the scratch path.
  2. A conical diamond stylus of defined geometry is drawn across the surface at a constant normal load, at a set speed and length.
  3. A second low-load scan, an optical image or a 3D profilometer scan measures the residual scratch width.
  4. Scratch hardness is calculated from the load and the residual width, per ASTM G171.

Each sample is scratched several times under identical conditions to confirm reproducibility.

Comparing materials

Because the calculation uses only load and residual width, materials as different as aluminium and stainless steel can be ranked directly. In NANOVEA’s metal study on a PB1000, a 120° diamond cone with a 200 µm tip gave scratch widths of 220 µm on Cu110, 174 µm on Al6061 and 89 µm on SS304. That corresponds to scratch hardness of 0.52, 0.84 and 3.2 GPa.

Measuring the scratch properly

Scratch width is the key input, so how it is measured matters. Optical measurement is quick; low-load profile scans give the profile change directly on the instrument; 3D non-contact profilometry adds depth and pile-up and avoids judging edges by eye. For polymers with strong elastic recovery, the residual width must be measured after the stylus has passed, not under load.

Mechanical tester or tribometer

NANOVEA mechanical testers cover scratch hardness at nano and micro loads, suited to thin layers, polymers and small samples. For higher loads and testing at temperature, ASTM G171 scratch hardness also runs on NANOVEA tribometers, including inside the high-temperature oven.

Standards

StandardScope
ASTM G171Scratch hardness of materials using a diamond stylus

The reference method: constant-load scratch with a diamond stylus; scratch hardness from the residual scratch width.

Instrument parameter limits may differ from those specified within the standard.

Related tests

Instruments that run this test

Every instrument is built to order. Send us your samples and we run your test in our laboratory first, then configure the instrument around the result.

Published results

Measured in our own laboratory, on the instruments we design and build, and published with full test parameters.

All mechanical testing application notes →

Independent published research

NANOVEA instruments appear in 7 published studies on scratch hardness and scratch resistance, by researchers at universities and industrial laboratories worldwide.

All 7 studies →

NANOVEA materials testing laboratory

Need scratch hardness data? Send us your samples.

Our laboratory measures scratch hardness on the same mechanical testers and tribometers we build, and reports scratch widths, images and HSp values with the full test parameters.

Your samples are tested by the people who design the instruments, so you get advice on the method as well as the numbers.

Indentation & scratch lab services

Frequently asked questions

What is scratch hardness?

A measure of resistance to permanent grooving by a sharp stylus. ASTM G171 defines the scratch hardness number from the applied normal load and the width of the residual scratch made by a diamond stylus of specified geometry. Narrower scratches at the same load mean higher scratch hardness.

How is scratch hardness different from indentation hardness?

Indentation hardness measures resistance to a static, normal load. Scratch hardness adds tangential motion, so it also reflects how the material deforms and fractures under sliding contact, including ploughing and pile-up. It is closer to real scratching and abrasion damage, which is why the two can rank materials differently.

How is the scratch width measured?

Optically with a microscope, from low-load profile scans across the track before and after the scratch, or in 3D with a non-contact profilometer, which also gives depth and pile-up. In the published NANOVEA study, profile scans at 10 mN measured the change in surface profile caused by each scratch.

Can scratch hardness be measured on polymers?

Yes. Polymers often show significant elastic recovery, so residual width is measured after the stylus has passed, and lower loads or the nano module are used for soft materials. Scratch hardness of lenses, coatings and plastics is a common quality measure.

Can it be measured at high temperature?

Yes. Scratch hardness per ASTM G171 has been measured on a NANOVEA tribometer in its oven: Teflon from room temperature to 300 °C, with the scratch width nearly doubling as it softened.