ES 
EN 
DE 
FR 
IT 
ZH 
JA 
PT 
TR 
KO 
PL 
AR 
Surface Area Measurement of Oxidation With 3D Profilometry
The 3D Non Contact Perfilómetro will be used to characterize the surface area measurement of two samples with A1SiN coatings, one with a low level of silicon the other with a high level. The A1SiN coating was deposited on H13 Steel by magnetron sputtering then submitted to an oxidation resistance test (900°C-1hour).
Tribological Characterization of Ti-WS2 Coating
In this report we will review the tribological characterization of Ti-WS2 coating deposited by Magnetron Sputtering technique. The friction and wear tribology will be obtained with the Tribometer in reciprocating mode and an integrated optical profiler will be used to obtain wear rate.
He aquí algunos ejemplos de materiales que hemos probado este mes:
Mecánica:
• Nanoindentation of microseal
• Nanoindentation compression of micro ceramic
• Nanoindentation of micro rubber features
• Nano Scratch of microfeatures
• Nano Friction microtube
• Micro Scratch of engine parts
• Microindentation of coil coatings
• Microindentation yield strength of micro rods
Perfilometría 3D sin contacto:
• Topography of rubber samples
• Profile of micro parts
• Roughness of metal samples
• Roughness of wood samples
• Coplanarity of micro features
- Altura de paso de los microcanales
• Volume loss of micro pits
• Friction testing of liquid with micro particles
• Friction testing of metal samples
• Wear resistance of hard coatings
• Wear resistance of tile samples
• Wear resistance of polished concrete
He aquí algunos ejemplos de materiales que hemos probado este mes:
Mecánica:
- Nanoscratch failure of micro rod coating
• Nanoindentation compression of microparticle
- Nanoindentación DMA de polímero blando
• Nanowear of implant
• Microindentation yeild strength engine part
• Micro scratch/mar of hard composite
Perfilometría 3D sin contacto:
• Surface area of biomaterials
• Volume of micro nozzle
• Topography of adhesive
• Roughness of micro wire
• Roughness of thin films
• Texture of various rock samples
• Flatness of glass samples
Tribología:
• Friction testing of liquid solution
• Wear resistance of porcelain
• Wear resistance of hard optical coatings
• Wear resistance of implant samples
Scratch Resistance of Microstructure using Scratch Testing
In this application, the Nanovea Mechanical Tester in its nano scratch testing mode is used to measure the load required to cause failure to a microstructure. We must simulate the process of scratching in a controlled and monitored manner to observe scratch resistance. A 10μm diamond tipped stylus is used at a progressive load ranging from 10 mN to 20 mN to scratch the microstructure. The point where the coating fails by cracking is taken as the point of failure.
Connector Pin Inspection With 3D Profilometry
In this application, the Nanovea ST400 Perfilómetro is used to measure the full area of a connector surface and its pins. The application was chosen for its challenging features while highlighting the measurement options with Nanovea’s technique. There is an endless list surface parameters that can be automatically calculated after the surface scan. Here we will review a full 3D profile, flatness of the connector base, coplanarity of the pins and the roughness of a pin tip.
He aquí algunos ejemplos de materiales que hemos probado este mes:
Mecánica:
• Nanoindentation of micro features
• Nanoindentation fracture of nanocomposite
• Nanoindentation DMA of gel
• Nanoindentation DMA of steel
• Nano Wear of nano composite coatings
• Micro Scratch of coil coating
• Microindentation mapping of hard polymer
• Microindentation yield strength of micro rods
3D sin contacto Perfilometría:
• Roughness measurement of micro medical parts
• Roughness of peened surface
• Roughness of micro wire
• Roughness of mini turbine blade
• Step height of polymer structures
• Area of machined surface alteration
Tribología:
• COF of implant surface
• COF of medical device
• Wear rate of pvc tubing
• Wear rate of polished aluminum
• Wear rate of iron aluminide
He aquí algunos ejemplos de materiales que hemos probado este mes:
Mecánica:
• Nanoindentation mapping of bone
• Nanoindentation DMA of polymer
• Nanoindentation compression of micro features
• Nano scratch of self healing coating
• Micro wear of prosthetic
• Microindentation mapping of ceramic
• Microindentation yield strength of composite
Perfilometría 3D sin contacto:
• Topography of micro parts
• Profile of composite panel
• Roughness of peened surface
• Roughness of dental implant
• Roughness of mini turbine blade
• Dimension of microspheres
• Coplanarity of surface steps
• Friction testing of brake pad
• Friction testing of various lubricants
• Friction testing of medical device
• Wear resistance of polished hard wood
• Wear resistance of polished concrete
• Self lubricating composite wear and friction
He aquí algunos ejemplos de materiales que hemos probado este mes:
Mecánica:
• Nanoindentation mapping of polymer
• Mechanical properties of rock particles with nanoindentación
• Nanoindentation of wafers
• Nano scratch of coatings
• Micro scratch of coated wire
• Microindentation mapping of glass
• Microindentation yield strength of steel
Perfilometría 3D sin contacto:
• Topography of peened steel
• Profile of tooth mold
• Roughness of abrasive bit
• Texture flow botanical surface
• Flatness of micro part
• Coplanarity of micro features
Tribología:
• Fricting testing of lubricated composite
• Friction testing of prosthetic surface
• Wear resistance of hard wire
• Wear resistance of heat treated steel
He aquí algunos ejemplos de materiales que hemos probado este mes:
Mecánica:
• Nanoindentation compression of micro features
• Nanoindentation stress vs strain thin films
• Nanoindentation yield strength of composite
• Nano scratch of coatings
• Nano scratch of microstrip
• Nano friction medical devise
• Microindentation fracture toughness glass
3D sin contacto Profilometry:
• Profile of mems
• Profile of small turbine blade
• Micro machined parts roughness measurement
• Roughness of implant
• Texture pattern of micro fabric
• Coplanarity of printed electronic
• Coplanarity of micro features
Tribología:
• Friction testing of lubrication
• Friction testing of medical plastic
• Wear resistance of ceramic
• Wear resistance of composite
