Nanovea 3D Software
The Nanovea 3D software is the acquisition software that is used with all Nanovea Profliometers. The software permits the user to define the size of the area, or line to be measured, as well as the lateral resolution of the measurement. Macro's are a standard feature allowing user trained measurement across several samples, or sample trays. The software also allows three different views in real-time: 3D false color, 2D false color and 2D analysis. To make it easier to find and measure small surfaces, a re-centering function allows the user to point-and-click on the scanned image in order to re-center the next scan to that specific point; or by use of a point-and click feature from an optional offset video camera.

Mountains 3D Analysis Software
Optional software package available to all Nanovea Profliometers, which provides a complete set of surface analysis tools. User-friendly report making and editing. An extensive list of roughness, flatness, waviness and other surface parameters.Create's 3D images in false color, contour maps and photo simulation. A variety of filtering, leveling and other surface correction functions. Ability to create templates to be applied to multiple individual measurements. Dimensional analysis, surface area, volume, bearing ratio and texture direction. Grain counting, sorting, and other grain analysis. Spectral analysis, autocorrelation, and fractal analysis. Statistical analysis over a population of results. Ability to export raw data, images, and entire reports. Create and export your videos of the surface. 4D analysis to look at surface changes as a function of time. Motif analysis and additional functions available. There are endless options, please contact Nanovea for more details.

Nanovea PRVision Software
PRVision Software module can be included in Nanovea 3D Software when an optional camera is included. PRVision has the ability to automatically recognize features from a user-trained image file. The surface is scanned while automatically recognizing all features of interest; then either automatically measures every feature found or a select few that are chosen by the user. PRVision can also be used to reference sample orientation during a Macro measurement, which will automatically correct for rotations or displacement created when samples are loaded and unloaded from their holder. This option will significantly reduce setup time when a surface pattern or if several samples will be measured.